
Pick up a traditional vinyl plank and an SPC plank in the same oak design, and they may look almost identical. The difference becomes obvious once you hold them. Traditional luxury vinyl tile, or LVT, flexes. SPC stays rigid.
So, is vinyl the same as SPC? Not quite.
SPC flooring belongs to the wider vinyl flooring category, but its core is made differently. Traditional LVT generally uses a flexible PVC core, while SPC uses a dense stone-polymer composite core containing limestone and PVC.
That single change affects how firm the floor feels, how it is installed, how it responds to an uneven subfloor and which rooms it may suit better.
For homeowners comparing SPC flooring and vinyl flooring, the choice should therefore go beyond colour, wood grain or price per square foot. Two planks that look almost the same can feel very different once installed across an entire room.
Most of what you see on an SPC or LVT plank is very similar. Both can use a photographic design to reproduce oak, walnut, concrete, marble or other materials, protected by a wear layer on top.
The key difference lies beneath the surface.
So, is SPC flooring a type of vinyl?
Yes. In fact, manufacturers themselves classify many SPC products as rigid-core luxury vinyl flooring.
This is also why terms such as SPC vinyl flooring, rigid vinyl and rigid-core LVT often appear alongside one another. “Vinyl” describes the broader flooring family; “SPC” tells you much more about the construction beneath the decorative surface.
The core material of SPC flooring is therefore one of the first specifications worth checking when two products look similar but are priced differently.
A rigid or flexible core affects several things you will notice after installation, particularly comfort, noise and the way the floor responds to the surface underneath it.
The difference can be apparent when you walk barefoot across both materials.
| Material | Typical feel |
| LVT | Slightly softer with a little give underfoot |
| SPC | Firmer and more rigid |
| In an air-conditioned bedroom | LVT may feel more comfortable if you regularly walk barefoot |
| In high-traffic living areas | SPC’s firmer feel may be less of a concern |
That does not make one material comfortable and the other uncomfortable. The difference simply becomes more noticeable depending on how you use the room. In a bedroom, where you are more likely to walk barefoot, LVT’s slight give may feel more comfortable. Under a dining table or along a busy passageway, SPC’s ‘firmer feel’ may be less noticeable.
How quiet the floor feels underfoot depends on the material, installation method and whether acoustic backing is included.
| Flooring | What You May Notice |
| LVT | Generally quieter underfoot, with some impact sound absorbed by the flexible core |
| SPC without acoustic backing | May sound harder or more hollow, particularly over uneven or unsupported areas |
| SPC with acoustic backing | Backing can help reduce impact noise |
| SPC in upper-floor HDB or condo units | Footstep noise may be more noticeable depending on the flooring system |
If a separate acoustic underlay is needed, factor that into the total installation cost when comparing LVT and SPC flooring quotes.
Both LVT and SPC are commonly chosen for homes in Singapore because they do not react to humidity in the same way as natural timber.
| LVT | SPC | |
| Installation | Usually glued directly to the subfloor | Usually installed as a floating click-lock floor |
| Movement | Typically requires less allowance for movement | Requires some gaps to allow for expansion and contraction |
| Where to pay attention | Areas with a properly prepared subfloor | Sun-facing rooms, large windows and spaces with frequent aircon use |
This is one area where the difference between SPC and vinyl flooring is often oversimplified. A flexible plank does not mean you can skip subfloor preparation.
| Flooring | How It Responds to Unevenness |
| Glue-down LVT | Because it is bonded directly to the base, dips, ridges and other imperfections may become noticeable through the finished floor. |
| Floating SPC | Its rigid construction can disguise some minor surface imperfections, but unsupported low spots may cause movement, clicking or a hollow feel underfoot. |
| SPC over existing hard flooring | Some products can be installed over suitable existing hard surfaces, provided the floor underneath is stable and sufficiently level. |
This is especially relevant in a resale HDB flat or an older condominium where the existing floor may have been tiled, hacked, screeded or renovated several times, making the subfloor uneven.
Neither material removes the need for proper subfloor preparation. The difference is in how unevenness becomes noticeable after installation.
There is no reason every room has to use the same type of flooring. How you use the space can be a better guide than trying to pick one material for the entire unit.
| Room | Recommended Material | Why |
| Bedroom | LVT | Its slightly softer feel might be preferable for a room where you regularly walk barefoot, especially with the air-conditioning on |
| Living room | SPC or LVT | SPC suits households that prefer a firmer rigid-core floor, while LVT may appeal if underfoot comfort is the priority |
| Dining area | SPC | Its rigid core generally offers stronger resistance to indentation, although furniture pads should still be used |
| Hallway and other busy areas | SPC | A practical option for spaces with regular foot traffic when paired with a suitable wear layer and usage class |
| Kitchen | SPC or suitable vinyl | Both can work when the product is approved for the space and spills are cleaned promptly |
| Study | LVT or SPC | LVT suits a quieter, softer feel; SPC may suit heavier desks, shelving and regular chair movement |
| Wet bathroom | Wet-area-approved flooring only | Standard dry-area LVT or SPC should not automatically be assumed suitable for a floor that is regularly hosed down |
The row to pay a little extra attention to is the last one.
This is because HDB requires waterproofing measures when bathroom or toilet floor finishes are replaced, including waterproofing screed and a waterproofing membrane beneath the floor finish. That underlying waterproofing system is separate from whether a plank itself is marketed as waterproof or water-resistant.
The flooring market uses several overlapping terms: vinyl, luxury vinyl, LVT, rigid vinyl, rigid-core vinyl and SPC vinyl flooring.
This can make quote comparisons confusing.
For example, one quote may simply say “vinyl flooring”, while another specifies SPC. Yet the first product could also be a rigid-core vinyl plank. Alternatively, two products both described as SPC may differ in thickness, backing, wear layer, usage class, locking system and certification.
The way around it is to set the category name aside at the counter and ask for these specifications instead:
| Feature | LVT / Flexible Vinyl | SPC |
| Core composition | Primarily flexible PVC construction | Rigid stone-polymer composite, typically containing limestone and PVC |
| Rigidity | Flexible | Rigid and dense |
| Underfoot feel | Slightly softer | Firmer |
| Acoustics | Often quieter when glued directly to a prepared subfloor | Depends strongly on backing, underlay and installation |
| Installation | Commonly glued down, although other formats exist | Usually floating click-lock installation |
| Expansion provision | Glue-down products may not require a perimeter expansion gap | Floating systems generally require manufacturer-specified perimeter clearance |
| Water resistance | Product-dependent; many flooring options are highly water-resistant | Product-dependent; many flooring options are marketed as waterproof |
| Dent resistance | Flexible core can be more susceptible to indentation | Rigid core generally offers better indentation resistance |
| Uneven subfloor | Requires a smooth base because imperfections may remain noticeable | Can hide some minor imperfections but still requires a sufficiently flat, stable base |
| Typical room choice | Bedrooms, studies and spaces where underfoot comfort is valued | Living areas, passages and busy household spaces |
| Eco certification | Depends on the individual product | Depends on the individual product |
So which should you choose?
If you prefer a “firm” floor, a floating installation and strong resistance to indentation, SPC flooring is likely to make more sense. If you place greater value on a slightly softer feel or want a glue-down installation, traditional LVT might be the practical option.
Many homeowners do not need to turn SPC flooring vs vinyl into an all-or-nothing decision. The better material can change with the room, the existing subfloor and how that part of the home is used.
The colour may be what catches your eye first, but the core and installation system will affect your experience of the floor long after the renovation is complete.
At The Floor Gallery, we carry a range of vinyl flooring, including waterproof vinyl flooring, and rigid flooring options for different residential requirements. Speak to us about your existing subfloor, the rooms you are renovating and the type of feel you prefer underfoot. We can help you compare suitable flooring options based on the actual specifications and needs.
Yes. SPC uses the same printed design layer and clear wear layer as any vinyl floor, so at the surface it is vinyl through and through. What sets it apart is the core, a rigid stone-polymer composite in place of the flexible PVC in a traditional luxury vinyl tile. So when the question is whether SPC is considered vinyl, the accurate answer is that it is one branch of the vinyl family, engineered stiffer at the core.
It depends on the room and the state of the screed. A resale flat often has a slightly uneven subfloor from an earlier tile hack, and glued LVT bonds flat to that surface and follows the minor dips, which avoids the hollow spots a floating SPC plank can leave over a low patch. For the living and traffic areas, SPC still gives you better dent resistance once the subfloor is levelled first. Many resale renovations end up using both, matched to each room.
Cooler than vinyl, yes, though the word “cold” overstates it in this climate. An SPC floor takes on the temperature of the room, so in an aircon-cooled bedroom the rigid surface feels cooler against bare feet than a flexible vinyl one would. In a living room without air-conditioning, the difference in underfoot temperature is usually less noticeable. Where a warmer, softer feel is the priority in a particular room, LVT is the more comfortable pick.
Depends on the specific product and installation system. Do not assume a standard LVT or SPC product is suitable simply because it is advertised as waterproof. A bathroom that is regularly hosed down places different demands on the flooring system because water reaches the joints, edges, floor traps and other details.
Ask past the label. The category names get used loosely, so instead of taking SPC or vinyl at face value, ask whether the core is rigid or flexible, whether it is fitted floating or glued to the screed, and what its usage class rating is.
They are about even. Both wipe clean with a damp mop, resist water at the surface, and need no waxing or sealing. SPC’s harder surface takes scuffs and dropped objects with a little more resilience in a busy kitchen or hallway. A flexible vinyl floor can show a dent under a heavy furniture leg left in one place, so felt pads under the legs are a sensible habit. Day-to-day upkeep on both is light.